ESP8622 based ATEM Mini Tally display
A very cheap and simple Tally display for ATEM Mini switchers using the video hub routing protocol.
For now it is optimized for the very cheap and basic ESP8266 ESP-01 module but should be usable on other variants too.
Uses the onboard LED for Tally display.
|Off||Device selected input is not used anywhere|
|Blink||Device selected input is used for preview|
|On||Device selected input is used for program|
|On||Device selected input is used for direct output|
A simple http interface is also available for changing input id and switching an input remotely.